On the sleeve compensator classification and introduction, we can draw on

Recently, many netizens have left a message for us, asking a question about the classification and introduction of the sleeve compensator Today, my company gave the answer to this question, the following is my company sorted out the answer:

1. The sleeve compensator is a compensator installed in any pipe conveying non corrosive single-phase or multiphase fluid. It is mainly composed of a sleeve (core tube),

The shell, the sealing material and so on, are compensated by the axial extension of the pipe and the axial rotation at any angle. The utility model has the advantages of small size and large compensation amount.

Widely used in urban heating, metallurgy, mining, power generation, petroleum, chemical, construction and other industries pipeline.

2 、 the inner sleeve of the new sleeve compensator is connected with the pipe, and adopts the principle and structure of the high performance self pressure dynamic sealing, which can be extended along with the pipe

Shrink in the housing for automatic sliding, can adapt to any pipe sealing requirements. The shell and inner sleeve are sealed with new synthetic material

High temperature, corrosion resistance, aging resistance, suitable temperature -40 degrees to 150 degrees Celsius, under special circumstances up to 350 degrees celsius. The utility model can ensure axial sliding and ensure the axial sliding

The medium does not leak.

3. The new type sleeve compensator designs the anti breaking device, which can ensure that the whole pipe network is not opened when it is stretched to the limit position

Security is greatly improved.

4, the sleeve compensator does not require chlorine ion content, especially suitable for medium or surrounding environment on the system of ultra high chloride ion.

5 、 the directly buried bushing compensator can not be maintained for more than twenty years. It can be buried directly in the ground. It is not necessary to set up a maintenance well when installing. It can reduce the cost of the project.

6. When installing and using the sleeve compensator, the stress produced by the linear compensation of the pipeline and the angle compensation can be eliminated reasonably.

7 、 sleeve compensator has flange, welding connection mode, can be divided into two types of one-way and two-way

The above is our company introduced to you "on the sleeve compensator classification and introduction", and we hope to help you. If you have any further questions, please visit our website and leave a message for us. We will answer for you at any time!